Know which machines are running. Right now.

Clip-on power and vibration monitors + a real-time dashboard for your entire shop floor.

Book a Demo See How It Works

bsrrobotics.ai/dashboard

Machine Fleet

Total

Active

87%

OEE

FANUC #1

2.4 kW · 92%

FANUC #2

1.8 kW · 88%

TRUMPF #1

0.3 kW · Idle

Haas VF-2

3.1 kW · 95%

DMG Mori

2.7 kW · 81%

Press #3

0 kW · Down

Power consumption (24h)

Your floor has blind spots

85% of downtime events impact profits before they're even reported. Here's what's costing you.

Downtime goes unnoticed

A machine stops at 2pm. Nobody finds out until the next shift. Hours of lost production, invisible until it's too late.

Data trapped in machines

Every CNC has data inside it. But it's locked behind proprietary protocols with no unified view and no history.

Clipboards don't scale

Manual tracking worked with 3 machines. Not with 30. Spreadsheets, guesswork, and walking the floor eat hours every week.

Replace guesswork with real-time data

Instant alerts when something changes. A timeline of every machine's day. No walking the floor.

Press #3 stopped unexpectedly ALARM

Power draw dropped to 0W · Vibration ceased

Just now

FANUC #2 vibration spike detected WARNING

RMS vibration 0.82g · Threshold: 0.5g

4 min ago

Haas VF-2 resumed production OK

Idle for 12 min · Now drawing 3.1 kW

14 min ago

DMG Mori power anomaly · 4.2 kW (avg: 2.7 kW)

Sustained for 8 minutes · Monitoring

22 min ago

FANUC #1 shift started · 2.4 kW

Equipment state: Running · OEE: 92%

1 hr ago

Live activity feed

Every state change, power anomaly, and vibration alert — the moment it happens. No walking the floor to check.

Today's utilization

6am – 4pm

FANUC #1

FANUC #2

Haas VF-2

DMG Mori

TRUMPF #1

Press #3

Running

Idle

Down

Off

Machine utilization timeline

See exactly when each machine ran, idled, or went down. Spot patterns across shifts, days, and weeks.

Hardware + Software. One system.

A monitor that clips on. A dashboard that shows everything.

Hardware

The Monitor

Clips onto any machine. Measures power on 3 circuits and vibration via 9-axis IMU. Detects running, idle, or off. Sends data over WiFi.

3 CT Inputs 9-Axis IMU WiFi SD Card 5V DC OTA Updates

Software

Active

4 / 6

Machines running

OEE

87%

Today

Energy

$142

Today's cost

Utilization trend

The Dashboard

See every machine in real time. Fleet status, production counts, energy costs, OEE, and alarms — one screen for your entire floor.

Fleet View OEE Energy Costs Alarms Production Reports

Up and running in minutes

Clip on

CT clamps around power cables. Mount the board to your machine or panel. No drilling, no splicing.

5 minutes per machine

Connect

Device broadcasts WiFi. Enter your network credentials. Automatic cloud sync starts immediately.

Self-guided setup

Monitor

See every machine on your floor: running, idle, or down. Get alerts the moment something changes.

Real-time data

Simple pricing

One device per machine. One dashboard for everything. No hidden fees.

Hardware

Utilization Monitor

$1,000

per workstation, one-time

3 CT clamp inputs
9-axis vibration sensor
WiFi connectivity
SD card logging
5-minute install, no wiring
OTA firmware updates

Get Started

Software

Real-Time Dashboard

$50/mo

per workstation

Live machine status
OEE & utilization tracking
Energy cost per asset
Instant alerts & alarms
Shift & daily reports
Unlimited users

Book a Demo

Volume discounts available for 15+ machines. Contact us

What you see

Everything a shop floor manager needs. Nothing they don't.

Machine state

Running, idle, or off — detected automatically from vibration and power draw.

Power per machine

Real-time watts, voltage, and current. Track energy cost per asset.

Vibration & health

9-axis IMU detects anomalies before they become failures.

OEE & production

Parts produced, cycle times, and utilization — across every machine.

Instant alerts

Know immediately when a machine goes down or shows warning signs.

Shift reports

Automated daily and shift reports. No more manual spreadsheets.